Specifications
800G OSFP Transceivers for High-Performance Networks
The EN-OSFP800-LPO-2FR4 is an 800G OSFP Linear Pluggable Optics (LPO) transceiver with two independent 400G FR4 interfaces. Each interface uses four CWDM wavelengths, and the module connects over single-mode fiber up to 2 km through dual duplex LC connectors. It consumes a maximum of 8 W, provides CMIS 5.2 digital diagnostics, and uses an IHS finned-top heatsink for switches.
| Parameter | Specification |
|---|---|
Form Factor | OSFP |
Optical Architecture | 2×CWDM4, LPO |
Data Rate | 800G (2×400G Ethernet) |
Wavelengths | 1271 / 1291 / 1311 / 1331nm |
Electrical Interface | 8×106.25Gb/s PAM4 |
Fiber | Single-mode fiber |
Connector | Dual Duplex LC |
Maximum Power Consumption | 8W |
Maximum Reach | 2km |
Storage Temperature | −40°C to +85°C |
Operating Case Temperature | 0°C to +70°C |
Management | CMIS Rev. 5.2 |
Supply Voltage | 3.3V |
Heatsink | IHS Finned Top (Switch) |
Diagnostics | Temperature, voltage, bias current, Tx/Rx optical power |
Host Compatibility | LPO-capable switching platforms |
Connectivity examples
800G to 800G Direct Connectivity
800G to 2x 400GE Breakout Connectivity
Selection Guide
Selecting the right 800G transceiver depends on the host form factor, distance, installed fiber, connector type, thermal capacity, and required port configuration.
| Selection Criteria | Option | Recommended Transceiver | Fiber / Connector | Typical Use Case |
|---|---|---|---|---|
| Host Form Factor | OSFP | EN-OSFP800-SR8-M16, OSFP VR8, DR8, 2×FR4, 2×LR4 or coherent OSFP | OSFP host interface with integrated or riding heat-sink support | High-density switches, AI fabrics, HPC systems and cloud platforms |
| Host Form Factor | QSFP-DD800 | QSFP-DD800 SR8, DR8, 2×FR4, 2×LR4 or coherent optics | QSFP-DD800 host interface | Platforms designed specifically for QSFP-DD800 modules |
| Distance | Up to approximately 50 m | 800GBASE-VR8 or selected 2×400G SR4 modules | Parallel MMF; MPO-16/APC or dual MPO-12/APC | In-rack, adjacent-rack and short-row connections |
| Distance | Up to 100 m | 800GBASE-SR8 | OM4 MMF; single MPO-16/APC | AI clusters, HPC fabrics, leaf-spine and short-reach switch interconnects |
| Distance | Up to 500 m | 800GBASE-DR8 or 2×400GBASE-DR4 | Parallel OS2 SMF; MPO-16/APC or dual MPO-12/APC | Data-center spine links, aggregation and high-density interconnects |
| Distance | Up to 2 km | 800G 2×400GBASE-FR4 or selected DR8-2 implementations | Duplex or parallel SMF; dual duplex LC, CS or MPO depending on module | Large data centers, campus aggregation and short-reach DCI |
| Distance | Up to 10 km | 800G 2×400GBASE-LR4 | Single-mode fiber; dual duplex LC or dual CS | Campus, inter-building and metro-access connections |
| Distance | Up to 120 km | 800ZR coherent OSFP, with an appropriate amplified DWDM system | Duplex SMF LC; tunable coherent DWDM | Data-center interconnect and metro transport |
| Distance | Regional or long haul | 800G ZR+ coherent OSFP with a compatible line system | Duplex SMF LC; amplified DWDM | Metro, regional and long-haul transport |
| Fiber Type | OM4 multimode fiber | OSFP800-SR8 | MPO-16/APC | Short-reach, low-latency data-center connectivity |
| Fiber Type | Parallel single-mode OS2 | DR8, DR8-2 or 2×DR4 | MPO-16/APC or dual MPO-12/APC | 500 m to 2 km parallel-fiber links |
| Fiber Type | Duplex single-mode OS2 | 2×FR4, 2×LR4, ZR or ZR+ | Dual duplex LC, dual CS or duplex LC depending on module | Campus, DCI, metro and transport applications |
| Connector Type | MPO-16/APC | OSFP800-SR8, selected VR8 and DR8 modules | Sixteen parallel fibers | Direct 800G links using eight transmit and eight receive lanes |
| Connector Type | Dual MPO-12/APC | Selected 2×SR4, 2×VR4 and 2×DR4 OSFP modules | Two independent eight-fiber optical interfaces | Dual-400G connectivity and modular cabling |
| Connector Type | Dual Duplex LC | 2×FR4 or 2×LR4 | Two duplex SMF pairs | Two 400G WDM optical connections |
| Connector Type | Dual CS | Selected 2×FR4 or 2×LR4 modules | Two compact duplex SMF connections | High-density WDM connectivity |
| Optical Technology | 8×100G PAM4 parallel multimode optics | SR8 and VR8 | Parallel MMF with MPO interface | Cost-effective, low-latency short-reach links |
| Optical Technology | 8×100G PAM4 parallel single-mode optics | DR8 and DR8-2 | Parallel SMF with MPO interface | Medium-reach data-center connections |
| Optical Technology | Dual 400G WDM engines | 2×FR4 or 2×LR4 | Dual duplex LC or dual CS | Reuse of duplex-fiber infrastructure |
| Optical Technology | Coherent DWDM | 800ZR and 800G ZR+ | Duplex SMF LC with compatible DWDM system | DCI, metro, regional and long-haul transport |
| Breakout Capability | 800G to 2×400G | Selected SR8, VR8, DR8 and dual-engine OSFP modules | MPO or dual optical connectors depending on module | Connecting one OSFP port to two 400G endpoints |
| Breakout Capability | 800G to 4×200G | Selected parallel-optics modules and host platforms | MPO breakout assembly | High-density NIC, DPU and accelerator connectivity |
| Breakout Capability | 800G to 8×100G | Selected eight-lane OSFP modules and host platforms | MPO-16 breakout assembly | Connecting one 800G port to eight 100G endpoints |
| Power and Thermal | Less than 16 W | OSFP800-SR8-M16 | OSFP cage must support the module’s finned-top cooling configuration | High-density short-reach data-center deployments |
| Power and Thermal | Higher thermal budget | Long-reach WDM and coherent OSFP optics | Platform-specific power and cooling | Metro, DCI and extended-reach applications |
Applications
Deployment scenarios for this module
Data Center & Enterprise Networks
High-speed connectivity for leaf-spine architectures, server aggregation, and backbone upgrades supporting growing east-west traffic.
Telecom & Service Provider Transport
Robust optical connectivity for aggregation, metro, and long-haul transport across carrier and service provider networks.
Cloud, AI & Hyperscale Infrastructure
Reliable, low-latency links designed for high-performance computing, AI workloads, and scalable cloud environments.
Performance & Reliability
We ensure our optical transceivers deliver exceptional performance and long-term reliability through rigorous testing on industry-leading equipment.
Power & Wavelength Testing
We verify signal strength and wavelength stability to ensure seamless decoding and consistent transmission across the optical path.
Traffic Testing
All transceivers undergo bit error rate (BER) and packet loss testing to guarantee zero data loss and full compliance with Ethernet and Fiber Channel standards.
Optical Performance Validation
Our modules are evaluated for signal integrity, eye diagram clarity, and BER, ensuring stable, high-quality optical transmission in all operating conditions.
End Face Inspection
Each module's fiber interface is inspected and cleaned to eliminate contamination and physical defects - a critical step for optimal signal performance and long service life.
Warranty & Compatibility
Optical Transceivers (1G–400G): Lifetime (5 Years)
Zero Risk
Using our transceivers does not void the warranty of your network equipment. Global OEM policies and consumer protection laws (Magnuson-Moss Warranty Act) prevent manufacturers from denying support based solely on the use of third-party components.
Guaranteed Compatibility
Our modules are coded and tested for seamless operation across major platforms including Cisco, Arista, Juniper, HPE, Nvidia, Huawei, and more. This rigorous validation ensures plug-and-play reliability and full compliance with OEM specifications.
Technical Support & RMA
Have an issue? We provide full technical support and hassle-free RMA on all eligible transceivers. Our team is ready to help with any technical questions about compatibility or deployment. contact our technical support: support@ecin.ca
Q&A
Commonly asked questions
No. Under the Magnuson-Moss Warranty Act and similar global consumer protection laws, OEMs cannot void your equipment warranty simply because you use a third-party transceiver. Your equipment warranty remains intact.
Yes. Our modules can be coded for major OEM platforms (Cisco, Juniper, Arista, Nvidia, etc.) and support open networking environments including SONiC.
A compatible generic version can be provided and coded before delivery.
Common 800G OSFP transceiver types include SR8 for short-reach multimode-fiber links up to 100 m, DR8 for parallel single-mode-fiber links up to 500 m, 2×400G FR4 for single-mode links up to 2 km, and 2×400G LR4 for single-mode links up to 10 km. Coherent 800ZR and ZR+ optics are used for longer data-center interconnect, metro, and transport applications. The OSFP800-SR8-M16 specifically uses eight parallel 100G PAM4 optical lanes, an MPO-16/APC connector, and OM4 multimode fiber for distances up to 100 m.
Choose the transceiver according to the required distance and installed fiber infrastructure. SR8 is best for short data-center links up to 100 m and uses parallel OM4 multimode fiber with an MPO-16 connector. DR8 supports up to 500 m over parallel single-mode fiber and is well suited to leaf-spine links and breakout applications. 2×FR4 supports up to 2 km over two duplex single-mode connections, making it suitable for large data centers and short-reach DCI. 2×LR4 extends the distance to 10 km over two duplex single-mode connections for campus, inter-building, and metro-access links. Always verify the host platform’s OSFP compatibility, connector type, breakout support, FEC configuration, power requirements, and cooling capacity.
Yes. Our modules are coded for the specific platform you select at purchase. They are recognized natively by the switch OS without any additional configuration or commands.
No, E.C.I. NETWORKS 400G transceivers are designed to meet applicable IEEE and MSA specifications, deliver the required 400G data rate and optical reach for their optic class, and support standards-based monitoring such as DDM/DOM. Actual link performance depends on choosing the right 400G type, such as DR4, FR4, LR4, SR8, or ZR/ZR+, and matching it to the correct cabling, optical budget, switch compatibility, and thermal environment.
Yes. We offer full support, RMA service, and warranty coverage on all modules.
Resources
Downloads and documentation














